0
0

DAC Series – Aluminum Cylinders

DAC Series – Aluminum Cylinders

Category:

Description

Capacity: 20 – 150 tons
Stroke: 2.0 – 7.9 inches
Max. Operating Pressure: 10,000 psi (700 bar)

  • Lightweight, Aluminum design for maximum portability
  • 7075-T6 Aluminum alloy components for maximum strength and minimum weight
  • Steel base-plate and saddle for protection against load-induced damage
  • Anodizing treatment plunger, surfaces and inner barrel resists damage and extends cylinder life-span
  • Maximize sized springs increases speed of piston return and increase life-span of spring
  • Composite bearings prevent metal-to-metal contact, increasing cylinder life-span and resistant to side-load
  • Stop ring prevents piston from blowing out
  • DQC-3/8UF coupler and dust cap are included on all models

Specifications

Model Number Cylinder Capacity
tons (kN)		 Eff. Area
in2		 Stroke
(in)		 Collapsed Height
(in)
DAC -202 20 (218) 4.83 1.97 6.85
DAC-204 3.94 8.82
DAC-206 5.91 10.79
DAC-302 30 (309) 6.84 1.97 7.13
DAC-304 3.94 9.09
DAC-306 5.91 11.06
DAC-502 50 (496) 10.98 1.97 7.32
DAC-504 3.94 9.29
DAC-506 5.91 11.26
DAC-1004 100 (1002) 22.14 3.94 10.67
DAC-1006 5.91 12.64
DAC-1008 7.87 14.61
DAC-1506 150 (1589) 35.13 5.91 13.5
Optional Bolt Tilt Saddle Dimensions (in)
Cylinder Model /Cap.
(ton)		 Model Number Saddle
Diameter		 Saddle Protrusion
from Base
DAC-50 XKCATDAC-50 1.97 1
DAC-100 XKCATDAC-100 3.59 1.3
DAC-150 XKCATDAC-150 4.65 1.5

Features

Aluminum VS. Steel

The difference between Aluminum and Steel is that it has a lower finite fatigue life-span. This means that aluminum cylinders should not be used in high-cycle applications such as production.

DuraJack line of aluminum cylinders are designed to provide 5,000 cycles at their recommended pressure (This limit should not be exceeded).

Downloads

You may download the detailed specification for DAC Series below:

Specifications

Related products

Thank you for your enquiry

We will contact you within 3-5 working days.